POCKETWIZARD
FLEX TT5 + MINI TT1 Set for Canon Flash
USD $429.00
ADD TO CART
In stock
12 Months
Warranty
14 Days
Money Back
100%
Brand New
Overview
Please pay attention that this is a CE (EU) version with below Frequency:433.42 - 434.42 MHz, CE FrequencyCE (EU) Version is not compatible with US Version. We will not accept any return or refund request due to buyer misunderstanding of the version issue!



The smallest PocketWizard radio ever, the MiniTT1R Transmitter is part of a new generation of PocketWizard radios providing i-TTL and power control capabilities with Nikon Speedlights and select studio lights. Your creativity also extends far beyond X-Sync speeds with HyperSync and FP Sync capabilities.


The MiniTT1 locks onto the camera's hot shoe, supporting an on-camera flash with its own hot shoe while working with remote PocketWizard units. Remotes can be one or more PocketWizard FlexTT5R Transceivers connected to Nikon CLS / i-TTL flashes or any PocketWizard Receiver for triggering flash or remote cameras.


The MiniTT1 Transmitter is easy to use; just slide in place and begin to shoot. The new PocketWizard ControlTLR System interprets the complex CLS / i-TTL data being sent through the camera's hot shoe and digitally transmits it in a reliable radio signal. Change the exposure compensation dial on the camera, and those commands pass seamlessly through the system to your remote flash. Adjust your aperture or ISO and the system automatically corrects for those changes.


Add the PocketWizard AC3 ZoneController to easily adjust up to three zones of light independently, in both i-TTL or manual. PocketWizard ControlTL radio communication allows you to shoot farther, faster, around corners, through walls even at high noon in bright daylight. Now you can deploy a wireless i-TTL flash system wherever you want, without infrared limitations, in seconds.


TT5 is the Most Versatile PocketWizard Radio Ever.


The dedicated FlexTT5 Transceiver, with its built in hot-shoe and ControlTL firmware, is the perfect addition to Canon E-TTL II flash systems. The FlexTT5 takes the existing benefits of Canon wireless systems beyond the boundaries of infrared technology. When paired with the Mini TT1 Transmitter or another FlexTT5 Transceiver, a whole new world of wireless flash freedom opens up. The FlexTT5 is also the perfect Transceiver for your manual triggering needs and works with all MultiMAX channels and many of the MultiMAX advanced functions.



The FlexTT5¡¦s simple design comes to life through its hot-shoe connection with a camera or flash. Mount a flash or command unit on the FlexTT5 to use the same zone controls and ratio commands as you would normally. The system tracks your changes in ISO, shutter speed and aperture and reacts accordingly to make sure exposures stay right on target. Use the flash compensation dial on your camera or flash just as you would normally and the changes pass seamlessly through the system.


In The Box
  1. PocketWizard MINI TT1
  2. PocketWizard FLEX TT5
  3. Lithium Battery (CR2450)
  4. AA Batteries x 2pcs
  5. USB Cable
  6. USB Cable
Specifications
Mini TT1
TTL Compatibility
Canon CLS / i-TTL
Frequency:
433.42 - 434.42 MHz CE (EU Version)
Channels:
35 Channels over 5 Frequencies (CE)
Antenna:
Internal
Transmit output power:
Less than 0.001 watt (1/1000 of a watt or 1 milliwatt)
Range Performance:
Up to 800 feet (10 to 240 meters) for CLS / i-TTL triggering depending on flash used, antenna orientation and other variables.
Up to 1200 feet (10 to 365 meters) for basic triggering depending on flash used, antenna orientation and other variables.
Mounting:
Hot shoe only
Maximum Shooting Rate:
TTL Mode: within approximately 1 FPS of camera"s maximum FPS
Basic Trigger Mode:
Camera Max FPS (dependent on flash power settings)
FPS = Frames Per Second
Power / Channel Switch:
OFF - C.2 - C.1
Status Indicator:
LED, Green, Amber, Red status indications
Voltage Present:
3.3 VDC (all pins) - safe for all cameras
Hot Shoe voltage protection:
Up to 50V
USB:
USB Compliant 2.0, Mini-B Connector
Operating Temperature:
above -15C (5 F) and below 50 C (120 F)
Storage Temperature(without battery):
above -30 C (-22 F) and below 85 C (185 F)
Construction:
High impact plastic, captive battery door, hot shoe made of glass reinforced resin
Power:
3 V Lithium battery, CR2450 (included) or CR2354 Lithium coin cell type
Battery Life:
30 - 50 hours of camera "awake time" depending on shooting habits
Dimensions:
2.8" (7.1 cm) long x 1.9" (4.9 cm) wide x 1.3" (3.3 cm) tall
Weight:
2.3 oz (65 grams), 2.0 oz (57 grams) without battery
Included in the box:
MiniTT1 Transmitter, USB cable, CR2450 battery, Quick Guide
ROHS Compliant:
Yes
FLEX TT5
TTL Compatibility:
Canon E-TTL II
Frequency:
433.42 - 434.42 MHz CE (EU Version)
Channels:
35 Channels over 5 Frequencies (CE)
Antenna:
2.7" (6.9 cm) rubberized with 180 degree swing
Transmit output power:
Less than 0.001 watt (1/1000 of a watt or 1 milliwatt)
Range Performance:
Up to 800 feet (10 to 240 meters) for i-TTL triggering depending on flash used, antenna orientation and other
and other variables.
Mounting:
Hot Shoe, 1/4-20, lanyard, velcro
Maximum Shooting Rate Frames per second (fps)
TTL Mode: within 1 FPS of camera's maximum FPS
Basic Trigger Mode: Camera Max FPS
Power / Channel Switch
OFF - C.2 - C.1
Zone Select Switch
A-B-C (matches Nikon zones)
Status Indicator
LED: Green, Amber, Red status indications
Camera / P1 Port
1/8" (3.5 mm) stereo miniphone for 2-stage remote camera triggering. Port Voltage Handling: up to 50 Volts, 100
Tip = Trigger
Ring = Pre-Trigger
Sleeve = Ground
Flash / P2 Port
1/8" (3.5 mm) mono miniphone. Port Voltage Handling: up to 200 Volts, 4 amps peak, 250 milliamp continuous,
Minimum Receive Contact Time
Camera / P1 Port = 80 milliseconds
Flash / P2 Port = 500us
Voltage Present
3.3 VDC (all pins) - safe for all cameras
Hot Shoe voltage protection:
Hot Shoe: up to 50V
USB:
USB Compliant 2.0, Mini-B Connector, 5VDC regulated, 100mA, Pin 1 Positive, Pin 4 Ground
Operating Temperature
Above -15¢X C (5¢X F) and below 50¢X C (120¢X F).
Storage Temperature
Above -30 C (-22 F) and below 85 C (185 F)
Construction
High impact plastic, captive battery door
Hot Shoe made of glass reinforced resin
Power
Two (2) AA (IEC:LR6) Alkaline recommended, other chemistries (NiMH, NiCAD, Lithium) allowed, USB
Battery Life
60 + Hours
Dimensions
3.6" (9.2 cm) long x 2.9" (7.3 cm) wide x 1.4" (3.6 cm) tall, antenna lowered
Weight
5.4 oz (153 grams) 3.8 oz (108 grams) without batteries
Included in the box
FlexTT5 Transceiver, USB cable, Two (2) AA batteries, Quick Guide